Linsn RV908M32 Receiving Card For High-Quality Full Color LED Display

⬤Single card can support 24 group of RGB data output mode ⬤Maximum supports 384X512 pixels (Please note that there are recommended values depending on the design of LED screen) ⬤Supports brightness calibration pixel by pixel and single-card color space conversion ⬤Supports network cable BER test ⬤Supports configuration file read back ⬤Supports 138 decode, 595 serial decode and so on ⬤Realizes high refresh and high gray level effect

No.	1	2	3	4
Description	Gigabit port	Power connector	Power port	Red power indicator
No.	5	6/9	7	8
Description	Green indicator	Hub75 Connector	Self-test extension port	Self-test button

Rv908M32 is a standardize product for LED screen manufacturer, which is integrated with 12 standard hub75-type connectors and does not require an extra hub card. One card supports up to 384*512pixels and up to 24 sets of RCG data.

/	R1	1	2	G1	/
/	B1	3	4	GND	GND
/	R2	5	6	G2	/
/	B2	7	8	E	Row selection signal
Row selection signal	A	9	10	B	Row selection signal
Row selection signal	C	11	12	D	Row selection signal
Scan clock	CLK	13	14	LAT	Latch
Display enable	OE	15	16	GND	GND

Capacity	384X512 Pixels
Power	Input Voltage	DC4.5V ~ 5.5V
	Rated power consumption	3W
Working Environment	Temperature	-20℃~ 70℃
	Humidity	0% ~ 95%
Physical Dimensions	Dimensions	144.0 X 91.2mm
	Weight	99g
PackingInfo	Packing	Each card packed with small red foam bag, and 100pcs per carton
	Carton Dimension	622.0mm×465.0mm×176.0mm
	Carton Weight	12.7 kg

ISP technology in logic circuit design

The traditional LED electronic display control circuit is mainly designed by conventional digital circuit, which is generally controlled by digital circuit combination. In traditional technology, after the circuit design part is completed, the circuit board is made first, and the relevant components are installed and the effect is adjusted. When the circuit board logic function cannot meet the actual demand, it needs to be remade until it meets the use effect. It can be seen that the traditional design method not only has a certain degree of contingency in effect, but also has a long design cycle, which affects the effective development of various processes. When components fail, maintenance is difficult and the cost is high. On this basis, system programmable technology (ISP) appeared, users can have the function of repeatedly modifying their own design goals and the system or circuit board and other components, realizing the process of designers' hardware program to software program, digital system on the basis of system programmable technology take on a new look. With the introduction of system programmable technology, not only the design cycle is shortened, but also the use of components is radically expanded, field maintenance and target equipment functions are simplified. An important feature of system programmable technology is that it does not need to consider whether the selected device has any influence when using system software to input logic. During input, components can be selected at will, and even virtual components can be selected. After input is completed, adaptation can be carried out.Learn More+

Linsn Receiving Card Rv908M32 For Full Color LED Display

Products Details

ISP technology in logic circuit design

Featured Products

Contact us